TECHNONICOL CARBON PROF 300
Professional XPS slabs used for thermal insulation of basements, roofs, floors and facades, construction of railways and highways
Extruded polystyrene TECHNONICOL CARBON PROF 300 is a high-performance material widely used in buildings and constructions while arranging the thermal insulation of basements, roofs, floors and facades. Also used in the construction of railways and highways.
Enhanced compressive stress performance of the material at deformation makes TECHNONICOL CARBON PROF 300 the best choice for the most important and complicated projects.
TECHNONICOL CARBON PROF 300 is a thermal insulation material with uniformly distributed closed cells, which does not swell, shrink or absorb water. It is chemically resistant and is not a subject to putrefaction. The high strength of the material allows receiving an equal and simultaneously rigid base that essentially increases the durability of the whole thermal insulation system. It contains nanoscale carbon particles, which allow significantly increasing the thermal efficiency of the material.
Can be supplied with flat or L-shaped edges. A variation with the slope shape is available for the creation of the slope of 2.1 or 4.2% in order to drain water on the roof to funnels.
Product technical data
|Thermal conductivity λD, W/m*K||0.028-0.034|
|Compressive stress at 10% deformation, kPa||≥300|
|Long term water absorption by immersion WL(T) 0.7, %||≤0.7|
|Reaction to fire - ignitability, Euroclass||F|
|Width, mm||580-650 (±8)|
50-120 (-2; +3)
130-200 (-2; +6)
Thermal resistance (ASTM C177)