PLANTER standard
Dimpled HDPE membrane for protection of waterproofing layer, construction of preparation layer for foundation slabs, sanitation of damp walls
PLANTER standard is a dimpled membrane produced by extrusion method on a base of high-density polyethylene (HDPE), which is used for:
- protection of waterproofing layer from mechanical damage;
- construction of preparation layer for foundation slabs;
- protection of foundation from capillary moisture;
- sanitation of damp walls.
The material is very lightweight and easy to install, herein it is featured by high strength properties. PLANTER is resistant to chemicals, mould and bacteria, roots of plants and ultraviolet radiation. The top surface of the material is covered with conic studs of 8 mm in height and 10 mm in diameter.
The membrane is fixed mechanically, overlaps are sealed with NICOBAND self-adhesive sealant tape.
Product technical data
| PROPERTIES | PERFORMANCE |
|---|---|
| Length x width, m | 20 x 2.0 |
| Mass per unit area, kg/m² | 0.55 |
| Compressive strength, kPa | ≥280 |
| Tensile strength L / T, N/50 mm | ≥280 / ≥280 |
| Elongation, % | ≥20 |
| Studs height, mm | 8 |
