LOGICBASE P-SL-GR

TPO/FPA synthetic waterproofing membrane reinforced fiberglass

USEFUL

Synthetic waterproofing membrane produced by co-extruding a uniform highly flexible elastomeric polyolefin alloy with a fiberglass reinforcing mat that makes it dimensionally stable.

The membrane features contrasting colors on its upper and lower faces, providing a signal layer so that any damage occurring during or after installation will be immediately apparent. It is not UV resistant. LOGICBASE P-SL-GR membranes comply with CE marking requirements, if applicable (1).

Notes: (1) The membrane is equipped with specific accessories, to be requested explicitly.

Fields of application

  • LOGICBASE P-SL-GR membrane is recommended for waterproofing of underground structures: foundations, retaining walls.

TECHNICAL FEATURES (2)

Features EN Standards U.M. Tolerance Values
Standard thickness 1849-2 mm (-5/+10%) 1,5 1,8 2,0
Density 1849-2 kg/m² (-5/+10%) 1,37 1,64 1,82
Tensile strength L/T 12311-2/ISO 527 N/mm² 650 / 600 750 / 750 800 / 800
Elongation at break L/T 12311-2/ISO 527 % 600 / 600
Dimensional stability 1107-2 % ≤ 0.1
Cold flexibility 495 °C ≤ -40 (3)
Tear resistance L/T 12310/1 N 450 / 400 500 / 450 600 / 550
Resistance to static loading 12730/B kg ≥ 25
Water tightness (60kPa-EN 1928) 1928 Absolute
Joint strength
Tensile strength 12317-2 N/cm Compliant (specimen fails outside bond area)
Peeling 12316-2 N/cm ≥ 58
Durability: Waterproofing after thermal ageing 1926-EN 1928 Passes the test at 60 kPa
Resistance to algae and microorganisms ISO 846 Level 2 Compliant
Root resistance 13948 Passes the test

Notes:

(2) Tolerances as per EN 13967.
(3) Not tested at lower temperatures

PRODUCTION STANDARDS

Thickness (*) mm 1,5 1,8 2,0
Width m 2,10 2,10 2,10
Length (*) m 25 20 20
Standard colour (*) Beige / Black

(*) Different thicknesses, lengths and colours are available on demand and for minimum quantities