Waterproof coating for your terrace: what actually works in India?
If you are asking this question, chances are you have seen damp patches on the ceiling below, flaking paint, or a puddle that never quite dries. Terraces are the most exposed part of a home in India: baked by the sun for months, then hit by monsoon rain. Here is a straightforward guide to what works, and how to choose.
The short answer
For most Indian terraces, two types of TECHNONICOL coatings cover the need:
- TECHNONICOL ULTRACEM 2C, a two-component cementitious waterproofing coating, is a practical choice when the terrace will be tiled.
- TECHNONICOL ULTRATHANE, a one-component liquid polyurethane that cures into a seamless, elastic membrane, is a good choice for terraces with cracks, many details (pipes, corners, drains) or where a jointless membrane is preferred.
Which one is right depends on your terrace. Read on.
First, ask four questions
1. Will the terrace be tiled or left exposed?
2. Are there cracks, or is the slab old?
3. How many details does it have? (parapets, pipes, drains, corners, steps)
4. How soon is the rainy season?
Option 1: TECHNONICOL ULTRACEM 2C (cementitious coating)
A two-component coating mixed from a dry powder and a liquid, applied with a stiff brush, roller or trowel. No special equipment is needed.
Why it works for terraces:
-Designed for tiled terraces and balconies. Full cure takes 7 days, the standard window before tiling.
- Quick coats. A second coat can go on 4-6 hours after the first, so both coats can be completed in one working day.
- Tolerant of real-life surfaces. It is designed for micro-cracked concrete, screeds, plaster and precast structures, bridging cracks up to 1.5 mm.
- Non-toxic (per IS 6582), comfortable to work with in enclosed spaces.
Good to know: the pot life of the mixed material is 45 minutes, and it is shorter in strong sun, so mix in small batches and work in the cooler hours.
Option 2: TECHNONICOL ULTRATHANE (liquid polyurethane)
A one-component, moisture-curing polyurethane. It cures into one continuous, elastic membrane with no joints, overlaps or mesh, and is applied with a brush, roller, squeegee or airless spray.
Why it works for terraces:
- No seams, so fewer weak points at corners, pipes and drains.
- Elastic. Elongation above 450% and crack bridging of 2 mm or more, so it keeps working when the slab moves slightly.
- Strong adhesion to concrete (above 2.0 MPa) and resistance to 5 bar of water pressure.
- Root-resistant (test passed), useful if you plan a terrace garden.
- Renewal option. It can be used to renew old membranes.
Good to know: dry to the touch in 6-8 hours and fully cured in 7 days (at 20 °C and 50% humidity). Curing is slower in humid weather, so plan time accordingly, and check the technical data sheet for what finish the system needs on top.
Popular Articles
Share the article